Note/IllustrationAction
xx1900001878
Remove the assembly from the mounting
plate.
Note
Avoid colliding with the frame when re-
moving the unit.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
2
xx1900001885
i
For connected services gateway wired, there is no power cable.
Removing the robot signal exchange proxy
Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
1
xx2000000419
Pull the cable ties out from the locking
holes.
2
Continues on next page
Product manual - OmniCore V250XT 131
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the fieldbus master
Continued
To Next Page
Loading...
