ABB OmniCore V250XT - Page 282

Note/IllustrationAction
xx1900001909
Remove the attachment screws and take
off the cover.
2
xx2100002176
Remove the attachment screw on the
safety module and take out the safety
module.
Note
Be careful when you pull it out from the
card slot.
3
Refitting the safety module
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
1
Continues on next page
282 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.13 Replacing the safety module
Continued