Description
Defines the minimum and maximum deviation of the Z position from
the correct value.
Z pos dev min/max
Defines the probability that an item becomes rejected by a camera.
If set to 0%, the item setting “Rejected” in the Layout will decide if
the item is rejected.
Rejection Ratio
Allows you to edit the size of the layout.Layout Size
Edit Layout allows you to edit the selected flow.
For more information regarding Edit Layout see the following section.
Edit Layout
xx1900000584
Description
Allows you to rename the layer.Layer ID
Allows you to select a predefined pattern template.Pattern Template
The drop down list allows you to select one item you have created for
this system.
Available Objs
Add icon allows you to add the selected item onto the layer.
Allows you to define the align style when you have more than one item
in the layer.
Align Style
Left icon allows you to align all the items in this layer from the left.
Right icon allows you to align all the items in this layer from the right.
Center icon allows you to align all the items in this layer from the center.
Middle icon allows you to align all the items in this layer from the middle.
Top icon allows you to align all the items in this layer at from top.
Bottom icon allows you to align all the items in this layer from the bot-
tom.
Allows you to define the distribution style when you have more than
one item in the layer.
Distribute Style
Horizontally icon allows you to distribute all the items in the horizontal
direction.
Vertically icon allows you to distribute all the items in the vertical direc-
tion.
Continues on next page
138 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.10 Adding Flow
Continued
To Next Page
Loading...
