ABB PickMaster Twin - PowerPac - Example: One Pick from Indexed Work Area and One Place Work Area

5.2 Example: One pick from indexed work area and one place work area
Overview
This example describes changing a solution which contains one robot, two linear
conveyors (both using predefined sensor) to a solution which contains one robot,
one linear conveyor and one index work area. The robot picks the items from the
index work area and place them into the containers on the linear conveyor.
This example uses the previous example as a basis to do the subsequent
operations.
xx1900000680
Changing the solution
Opening the solution
For detail procedure in opening the solution, see Opening the solution on page 307.
Deleting the linear conveyor from the solution
Note/IllustrationAction
xx1900000532
Right click on the Recipe under Recipes
in the tree view browser and click Delete.
1
Continues on next page
Application manual - PickMaster® Twin - PowerPac 329
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.2 Example: One pick from indexed work area and one place work area