4.3.8.2 Detailed vision information
Detailed vision information
More detailed information than given by the live images is shown in the Detailed
Vision Information dialog. This dialog box keeps a buffer of images and information
about the corresponding vision model hits.
Sequences of images can be record to the buffer and then analyzed individually.
While recording, images are saved in the buffer in a first in, first out basis and the
latest image is shown in the dialog.
When clicking pause, images are no longer added and the images in the buffer
can be analyzed. Save the images in the current buffer to file for later analysis with
the Vision Analyzer program, see Vision Analyzer on page 243.
One dialog can be opened for each vision defined position source (the name of
the camera and the solution is shown in the title bar). You can continue working
with the solution while the dialog is opened. Reduce the window size if the window
is blocking other information.
The maximum size of the buffer depends on the RAM memory on the computer.
If several dialogs are opened at the same time and the maximum memory size is
reached, you can reduce the buffer for one dialog to increase the buffer for another.
Continues on next page
Application manual - PickMaster® Twin - PowerPac 241
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.8.2 Detailed vision information
To Next Page
Loading...
Need help?
General
