4.2.12 Simulation
Overview
This section describes how to do the simulation with the created solution.
Production
All operations in the simulation production are reflected in the station view, and
all data comes from the solution.
xx1800001738
Description
Allows you to control the status of the production and have an overview of
the production data.
Statics
For more information regarding Statics see the following section.
Allows you to adjust the parameters of the item, work area and robot.Tuning
For more information regarding Tuning see the following section.
Allows you to adjust the speed of the conveyor.Flow Control
For more information regarding Flow Control see the following section.
Allows you to see the live video of the camera.Vision
This function is only available in the real production and emulation. For more
information, see Vision on page 284.
Continues on next page
Application manual - PickMaster® Twin - PowerPac 159
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.12 Simulation
To Next Page
Loading...
Need help?
General
