Statics
xx1900000644
Description
Allows you to control the status of the production.Recipe Status
Allows you to have an overview of the picking status in summary or detail.Picking Status
Tuning
Sometimes, the exact pick and place positions are not exactly where expected.
This might be caused by a small error in the calibration of either the camera or the
work area. It is possible to adjust the positions while running a project. This is
called tuning.
Description
Allows you to control the status of the production.Recipe Status
Allows you to choose the objects in the solution and change their paramet-
ers.
Type
Continues on next page
160 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.12 Simulation
Continued
To Next Page
Loading...
