4.3.11 Managing the robot in production
Starting production
Start and stop the production from the Production menu.
During runtime, the robots are accessed from the Production tab in the Workspace
area. For more details, see Production on page 283.
xx1900000550
Prerequisites
The solution must be configured to start production.
The recipe must be open and active.
Pick rate
The pick rate is shown as icons in the Production tab when a robot is running.
The following values are shown:
• Number of pick during the last minute.
• Total number of picks since the production was started.
Continues on next page
Application manual - PickMaster® Twin - PowerPac 287
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.11 Managing the robot in production
To Next Page
