ABB PickMaster Twin - PowerPac User Manual

7.4.2 The camera does not take pictures
Error description
The camera does not take pictures.
Probable causes
There can be several causes why the camera does not take pictures. To check all
the possible causes the following must be verified.
• Check that the trig cable is properly connected.
• Check that the camera cable is connected to the correct port.
If the camera is distance trigged, the encoder might not be recording any conveyor
movement due to
• bad encoder connection or
• wrong conveyor selected in the work area.
If the camera is I/O trigged, the photo eye might not be sensing any part, due to:
• Wrong connection.
• Bad reflection.
428 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
7 Troubleshooting
7.4.2 The camera does not take pictures

ABB PickMaster Twin - PowerPac Specifications

General

Brand	ABB
Model	PickMaster Twin - PowerPac
Category	Robotics
Language	English