ABB PickMaster Twin - PowerPac - Page 427

Warning 4328 received without 4329
Error description:
4328 Trigger/strobe time mismatch (%.1f s). Item positions from %s to %s lost.
See Application manual.
Probable causes:
The following table provides the probable causes of the warning 4328 and 4329:
Verfication actionsProbable cause
Action 2 on page 424The trigger signal is not stable.
Warning 4329 received without 4328
Error description:
4329 Trigger/strobe time mismatch (%.1f s). Strobe from %s was ignored. See
Application manual.
Probable causes:
The following table provides the probable causes of the warning 4328 and 4329:
Verfication actionsProbable cause
Action 2 on page 424The strobe signal is not stable.
Application manual - PickMaster® Twin - PowerPac 427
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
7 Troubleshooting
7.4.1 Warnings 4326 - 4329
Continued