ABB PickMaster Twin - PowerPac - Resetflowcount - Reset Flow Counter

6.1.7 ResetFlowCount - Reset flow counter
Usage
ResetFlowCount is used to reset the flow counter. The flow counter indicates the
number of objects that has passed the exit limit of a conveyor work area since last
reset. The value of the flow counter can be retreived with the function
GetFlowCount
Basic example
ResetFlowCount PlaceSource;
Resets the flow counter for an item source.
Arguments
ResetFlowCount ItemSource
ItemSource
Data type: itmsrc
The item source.
Error handling
The following recoverable errors can be generated. The errors can be handled in
an errorhandler. The system variable ERRNO will be set to:
DescriptionError code
itmsrc undefinedERR_ITMSRC_UNDEF
Syntax
ResetFlowCount[ItemSource ':=' ] <variable (VAR) of itmsrc>;
Related information
SeeFor information about
GetFlowCount - Get number of passed items
on page 383.
The function GetFlowCount
374 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
6 RAPID reference
6.1.7 ResetFlowCount - Reset flow counter