2.3 PickMaster PowerPac license
Introduction to licensing
A license activation key provided by ABB must be installed and activated to run
PickMaster PowerPac.
PickMaster PowerPac depends on the activation of Robotstudio. You can use
PickMaster PowerPac normally only if you activate RS with a license that includes
the PickMaster PowerPac option. It can also be activated separately from PickMaster
PowerPac, but still invokes the RS activation procedure.
PickMaster PowerPac license options
Two license options are available for PickMaster PowerPac, Basic and Premium.
Users can obtain the Basic option for free and work with limited functions. The
Premium option provides more functions for professional integrators and
commissioners.
Comparison between license options
The following table lists the main application scenarios and differences between
two license options.
PremiumBasic
PickMaster cell readyPickMaster cell readyRobotWare option
ActivatedUnactivatedRobotStudio requirment
Virtual (default)Real (default)Runtime
Create/SaveAdjust/SaveSolution/layout
Create/SaveCreate/SaveRecipe
Offline simulationOffline simulationSimulation
Ghost picking/emulationGhost picking/emulation
Information about the current license
Use the following procedure to get information about the current license.
NoteAction
Start the Robotstudio 2019.1
Click the File tab.2
Click Options.3
Click Licensing.4
Click the View install license... to get information
about the current license.
5
Continues on next page
Application manual - PickMaster® Twin - PowerPac 25
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
2 Installation
2.3 PickMaster PowerPac license
To Next Page
Loading...
Need help?
General
