ABB PickMaster Twin - PowerPac - Problem with Camera Resolution in Pickmaster

7.4.6 Problem with camera resolution in PickMaster
Error description
Camera image size decreases to lower resolution as compared to calibration image
resolution.
Probable causes
There can be several causes why camera resolution is decreased. To check all
the possible causes the following must be verified:
• Is the factory default configuration is active.
• There could be custom configuration activated. Verify if the custom
configuration is having reduced ROI (region of interest).
432 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
7 Troubleshooting
7.4.6 Problem with camera resolution in PickMaster