ABB PickMaster Twin - PowerPac - Adding Controller

4.2.2 Adding Controller
Overview
This section describes how to add and modify a controller.
xx1900000572
Create a controller
For more information on how to create a controller, refer to Operating
manual - RobotStudio.
WARNING
When creating an OmniCore controller, the Remote Start and Stop in Auto must
be selected. Or the PickMaster PowerPac CANNOT run simulation or production.
xx2100000051
Continues on next page
Application manual - PickMaster® Twin - PowerPac 75
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.2 Adding Controller