ABB PickMaster Twin - PowerPac - Main Window

3.2 Main window
Overview
This chapter describes about the user interface of the PickMaster PowerPac. The
following figure and table provides information regarding the major elements in
the user interface.
xx1800001382
DescriptionItem
Contains the general functions for PickMaster PowerPac.
When creating a new solution, the work flow is usually from
left to right. For more details, see the section Ribbon tab on
page 47.
Ribbon tab1
Organizes the programmable objects (for example, robots,
sensors, and conveyors) of the picking application in a tree
structure. It is separated into line and job tabs. For more de-
tails, see the section Tree view browser on page 56.
Tree view browser2
Realistic 3D display of the picking application. The objects
in the station view are highlighted when selected or edited
using the tree view browser.
Station view3
Shows the status of the controller and system at present.Status view4
46 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
3 Navigating PickMaster PowerPac
3.2 Main window