Use this procedure to do the simulation:
1 Click to choose one recipe from the tree view browser.
xx1900000590
2 Click Start on the ribbon-tab. Then it will start the simulation of created
solution.
xx1900000586
The simulation runs automatically.
3 Click Stop on the ribbon-tab. Then it will stop the simulation.
170 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.12 Simulation
Continued
To Next Page
Loading...
Need help?
General
