Description
Allows you to locate the IP address of the Runtime computer.
Note
It's not allowed to use any of the following IP addresses which are
allocated for other functions:
• 192.168.127.0 - 255
The IP address cannot be on a subnet which overlaps with any of
the above reserved IP addresses. If a subnet mask in the class B
range has to be used, then a private address of class B must be
used to avoid any overlapping. Contact your local network adminis-
trator regarding network overlapping.
See the section Communication in Technical reference manual - Sys-
tem parameters.
IP Address
Runtime Account
Allows you to enter the user name of your account in the Runtime.UserName
Allows you to enter the password of your account in the Runtime.Password
Enter your PC admin user name and password
Allows you to enter the user name of the administrator account for
the computer which the Runtime is installed.
UserName
Allows you to enter the password of the administrator account for
the computer which the Runtime is installed.
Password
A default user and password have been created for each role.
Administrator Username: admin with Password: password
Technicist Username: superuser with Password: ABB1998
Operator Username: operator with Password: password
Note
The Username and Password are case sensitive.
Note
If the solution will be used in the PickMaster PowerPac, it must have been
connected to a real controller with the same configuration on PickMaster
PowerPac.
Continues on next page
172 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.1 Switching to real Runtime
Continued
To Next Page
Loading...
Need help?
General
