Brightness and contrast can be changed to give an optimal image. Some
objects might be easier to find by adjusting the ambient lighting together
with the brightness and contrast parameters.
The effect of changing these parameter values is not seen until clicking
Apply.
7 Click OK.
Related information
Using color vision on page 289.
Calibrating camera on page 234.
184 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.2 Configuring camera
Continued
To Next Page
Loading...
