• Wait for the message ...is prepared for calibration. The conveyor
position in the jogging window for CNV1 should now be displayed as
“0” mm.
xx2100000398
3 Select the Workobject in the Option Tab.
xx2100000380
Continues on next page
226 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.6 Calibrating indexed work area
Continued
To Next Page
Loading...
