Use this procedure to calibrate the camera.
1 Right-click the camera in the tree view Cell and select Calibration.
xx1800001467
The Camera Calibration window is opened.
xx1800001468
2 Select the default calibration from the list and click Edit.
The Camera Calibration Feature and Calibration dialog are opened.
Continues on next page
Application manual - PickMaster® Twin - PowerPac 235
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.8 Calibrating camera
Continued
To Next Page
Loading...
