• Boundary box displays the minimum horizontal rectangle that contains
the whole blob.
• Item region displays the regions in the image window. Red regions
indicate an overlap and the corresponding hits will be considered as
discarded.
9 Click OK.
Blob parameters in item targets
The blob parameters Area, perimeter, circularity, and elongation can be
selected for the target storage.
Related information
Using color vision on page 289.
Histogram on page 272.
Item Properties on page 102.
RAPID programs on page 391.
Application manual - PickMaster® Twin - PowerPac 263
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.9.3 Configuring blob models
Continued
To Next Page
Loading...
