5 Move the line so the end points are located on the edges of the area under
the Image Setting.
xx1900000937
6 Adjust the Search Parameter in the Search Parameters according to the
Defined Distance in the Analyze Area.
xx1900000938
7 Click Search.
xx1900000939
Continues on next page
280 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.9.4 Configuring inspection models
Continued
To Next Page
Loading...
