output grayscale image. Colors that are dissimilar to the specified color
will be converted to black.
xx1900000943
c Click Get color to store this color range.
xx1900000944
4 In the Manual color filter part, adjust each color channel to improve the result
if needed.
• Low specifies the lower limit of the color range that will translate into
white pixels in the output image. Minimum is 0 and maximum is 255,
except for Hue which has no boundary.
• High specifies the upper limit of the color range that will translate into
white pixels in the output image. Minimum is 0 and maximum is 255
except for Hue which has no boundary.
• Fuzzy specifies how colors outside the minimum and maximum
thresholds should be filtered to the output grayscale image. A value
of 0 indicates that colors outside the range specified by Low and High
will be completely removed by the filter - the result is a black and white
image. A non-zero value means that colors outside the Low/High range
Continues on next page
294 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.4 Using color vision
Continued
To Next Page
Loading...
