ABB PickMaster Twin - PowerPac - Page 296

3 Add a Blob sub inspection model.
a Select Color filter and click Set. This opens the Color Filter Settings
dialog.
b Extract the color to be inspected by clicking Define color. This filters
the desired color into white in the Blob image window.
c Click Set filter to close the Color Filter Settings dialog.
d Adjust the Blob settings so as to find the white blob.
e If necessary, adjust the settings of the color filter and the Blob analysis.
4 Test the result in the Inspection Configuration dialog.
Example 2
xx1900000946
Color image before filter
xx1900000947
Black and white image after
filter
296 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.4 Using color vision
Continued