ABB PickMaster Twin - PowerPac - Page 317

Note/IllustrationAction
xx1900000661
Click on the Pick Operation1 to open the
setting window for the pick operation.
2
In the Source Type under Detection
Setting, select the Vision radio box.
3
Click to select the Test1 in Available
Camera.
4
Click to select the Item1 in Available
Objects.
5
Click to select the LinearWA1 in Avail-
able Workareas.
6
xx1900000662
In the Distribution tab under Distribution
Setting, click on Item1 in the Available
Items and drag LinearWA1 from the
Available distributors list to the Distribu-
tion Accept list.
7
xx1900000663
Click on the Place Operation1 to open
the setting window for the place operation
1.
8
In the Source Type under Detection
Setting, select the Predefined radio box.
9
Click to select the PContainer1 in Avail-
able Objects.
10
Click to select the LinearWA2Available
Workareas in Available Workareas.
11
Continues on next page
Application manual - PickMaster® Twin - PowerPac 317
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued