Note/IllustrationAction
xx1900000682
Right-click on one LinearWA2 in the tree
view Cell and select Setting.
14
xx1900000669
Select the Customized Settings in the
Signal Type tab.
15
Enter the required data into the I/O signal
setting table.
16
Click OK to close the Recipe setting
window.
17
xx1900000670
Right-click the Test1 in the tree view
Sensor and select Configuration.
18
Continues on next page
322 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued
To Next Page
Loading...
