Note/IllustrationAction
xx1800001470
In the Image part, click Live to get and
show new images continuously, or click
Acquire to get one new image. To use an
image from file or save the current image,
click Import or Export.
22
xx1900000646
For single-view calibration: When the
calibration plate is in position, acquire an
image and click Set Origin in the Calibra-
tion images part. This stores the image
and marks it as the origin image (the ori-
gin of this image will be the physical ori-
gin of the camera’s coordinate system).
23
xx1900000647
In the Calibration part, click Calibrate to
start calibration.
24
Continues on next page
356 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
