LOG
xx1800001175
DescriptionButton
Allows you to open the log viewer.Viewer
Allows you to save the log as csv file to your local folder.Save
RUNTIME
xx1800001176
DescriptionButton
Allows you to connect to the real Runtime.Connect to RRT
Allows you to change your password.Change password
Allows you to disconnect from the real Runtime.Disconnect RRT
Allows you to create or delete the users, and add groups for
different users.
User Manager
User Manager
Introduction
PickMaster PowerPac manages different users and groups. Each user has a use
group and each use group is associated with an ability. Users, groups, and abilities
are all defined in auth.conf. This file is located in the Pickmaster Runtime
installation folder under RIS\RIS2\auth\.
The groups "administrator", "technicist"and "operator" are provided. The
administrator has the ability to “manage” and the operator has the ability to
“operate”.
A default user and password have been created for each group.
Administrator Username: admin with Password: password
Technicist Username: superuser with Password: ABB1998
Continues on next page
Application manual - PickMaster® Twin - PowerPac 51
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
3 Navigating PickMaster PowerPac
3.3.1 Introduction
Continued
To Next Page
Loading...
