ABB Relion REC615 - Local HMI; Display

2.1.2 PCM600 and IED connectivity package version
• Protection and Control IED Manager PCM600 Ver.2.9 or later
• REC615 Connectivity Package Ver.2.0 or later
• RER615 Connectivity Package Ver.2.0 or later
Download connectivity packages from the ABB Web site or directly with
Update Manager in PCM600.
2.2 Local HMI
The LHMI is used for setting, monitoring and controlling the protection relay. The
LHMI comprises the display, buttons, LED indicators and communication port.
Overcurrent
Dir. earth-fault
Combined Protection
In sync fo close
Frequency protection
Breaker failure
Disturb. rec. triggered
CB condition monitoring
Supervision
Autoreclose shot in prog.
READY
START
PICKUP TRIP
ESC
CLEAR
R
L
HELP
MENU
CLOSE
OPEN
F1
F4
F3
F2
RE_615
Figure 2: Example of the LHMI
1MRS758755 C
REC615 and RER615 overview
REC615 & RER615
Technical Manual
29