ABB SCK - Maintenance: Cooling Module; Maintenance: Pneumatic System

OI/SCK
-EN Rev. E Operating instruction SCK Gas Sampling System 153
Maintenance task See … Inspection/Maintenance
intervall
as required
dayiy
weekly
twice yearly
yearly
every 2 years
Cooling module

Check cooling water, top up
if necessary
Cooling module: Checking and top-
ping up cooling water on page 210
X
 Vent the cooling-water
circuit
Cooling module: Venting the cooling-
water circuit on page 208
X X

Check cooling-water sys-
tem for leaks
Checking for leaks on page 173
X
Maintenance task See … Inspection/Maintenance
intervall
as required
dayiy
weekly
twice yearly
yearly
every 2 years
Pneumatic system
 Replace compressed-air
filter in pneumatic box
Pneumatic system: Replacing the
compressed-air filter on page 213
X

Check compressed-air
system for leaks
Checking for leaks on page 173
X