ABB SCK - Environmental Conditions for Transport and Storage

88 Operating instruction SCK Gas Sampling System OI/SCK-EN Rev. E
Observe the following physical limits when transporting the modules:
Module
Environmental conditions for transport
Retractor including
probe
Ambient temperature: +5 °C to +55 °C, after completely
draining all water and drying parts in contact with cool-
ing water or condensation: -20 °C to +55 °C
Air humidity: Year-round average max. 75 %, short-term
max. 95 %, occasional slight condensation is permitted
Cooling module
Ambient temperature: +5 °C to +55 °C, after completely
draining all water and drying parts in contact with cool-
ing water or condensation: -20 °C to +55 °C
Air humidity: Year-round average max. 75 %, short-term
max. 95 %, occasional slight condensation is permitted
Control cabinet
Ambient temperature: -20 °C to +55 °C
Air humidity: Year-round average max. 75 %, short-term
max. 95 %, occasional slight condensation is permitted
Transformer
(optional)
Ambient temperature: -25 °C to +55 °C
Air humidity: Year-round average max. 80 %, short-
term max. 95 %, without condensation
Compressed-air
tank
(optional)
Ambient temperature:
+5 °C to +55 °C, after completely
draining all water and drying parts in contact with cool-
ing water or condensation: -20 °C to +55 °C
Air humidity: Year-round average max. 75 %, short-term
max. 95 %, occasional slight condensation is permitted
Environmental
conditions