SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B 105
Device Info / ...Transmitter
Display of the transmitter design.
Display of the transmitter ID.
Display of the transmitter serial number.
Selection of submenu ‘...Transmitter Version’ using .
Display of the operating hours of the transmitter.
Number of device restarts (switching the power supply off and on).
Device operating hours since the last restart.
Display of the type of plug
-in card in slot 1 / 2.
FillMass function active?
VeriMass function active?
Selection of submenu ‘...Calibration’ using .
manufacturer address and telephone number.
Device Info / ...Transmitter / ...Transmitter Version
Version and item number of device software package.
checksum (CRC) of motherboard (MB) software in transmitter.
Version and checksum (CRC) of frontend board (FEB) software in sensor.
Hardware version of motherboard (MB) in
transmitter.
Hardware version of frontend board (FEB) in sensor.
Version of motherboard (MB) bootloader in transmitter.
Version of frontend board (FEB) bootloader in sensor.
Current output module software version and checksum (CRC).
Version and test number (CRC) of the software of the optional plug
-in cards.
Device Info / ...Transmitter / ...Calibration
Display of the calibration data of the transmitter.
To Next Page
Loading...
