Adtech ADT-DK300A - Program Exchange between CNC System and PC; System Operating Condition

BZ001M056A ADT‐DK300A/400A Engraving Machine

2
1.1.6. ProgramexchangebetweenCNCsystemandPC
Perform CAD/CAM/CAPPauxiliar y programmingwithabundantsoftwareinPC,andthentransmitCNC
program to the system through communication interface (USB disk, RS232 interface), or transmit the
programsfromthesystemtoPC.
1.1.7. Systemoperatingcondition
Operatingvoltage 24VDC(withfilter)
Operatingtemperature 0℃~45℃
Optimumoperatingtemperature 5℃~40℃
Operatinghumidity 10%~90%(nocondensing)
Optimumoperatinghumidity 20%~85%
Storagetemperature 0℃~50℃
Storagehumidity
10%~90%
Operatingen vir o nment
No excessive dust, acid, alkali, corrosive and explosive gases, no strong
electromagneticinterference