Adtech ADT-DK300A - Data Settings; Tool Compensation Data Setting

BZ001M056A ADT‐DK300A/400A Engraving Machine

19

Fig.4B
Editotheraxesinthesamemethod.
3.7 Datasettings
3.7.1. Toolcompensationdatasetting
Thetoolcompensationparameterscanbesetasfollow:
Press toselecttheeditmode;
Inthemainmenu,press[ ],andthenpresssubmenu[Compensation]toentertoolcompensationparameter
settinginterface;