Adtech ADT-DK300A - System Parameter Setting; Fast System Operation

BZ001M056A ADT‐DK300A/400A Engraving Machine

22

3.7.2. Systemparametersetting
Thesystemparameterscanbemodifiedasfollow:
Press toselecttheeditmode;
Inthemainmenu,press[ ]toenterparametersettinginterface;
Then,pres sthesubmenukeytoselecttheparametertype(comprehensive,management…);
Press , , , tomovecursortoselecttheparameter,enterthevalueandthenpress
[
]tomodifytheparameterwherethecursorlocates.
3.8  Fastsystemoperation
Thevalueentrydialogboxhastwoinputmethods,i.e.directassignmentandincrementassignment.For
directassignment,theenteredvalueisassignedtospecifiedparameterdirectly ;forincrement
assignment,theenteredvalueisaddedtospecifiedparameterandthenassignedtothepar ameter;the
incrementinputboxanddirectinput
boxhaveapromptsymbolintheleftrespectively,‘=’indicates
directinput,‘+’indicatesincrementinput,andthedefaultmodeisdirectassignment.Toch angeto
incrementassignment,pressthe“
/ ”key.