Adtech ADT-DK300A - Graphic Simulation

BZ001M056A ADT‐DK300A/400A Engraving Machine

45

FileOperationInterface
8.7. Graphicsimulation
[Track]functionistosimulateNCprocessingprogram.
Toentergraphicsimulationinterface:

Enter track interface to enable real‐time track display automatically. During automatic running of the
system,themotiontrackisdisplayedinreal‐time.Instandbymode,youcanalsopressPreviewtoprescanthe
processingfile.
Theshortcutsofadjustingposition:
 : Zoomin
 : Zoomout
, , , :Shiftposition;theshiftunitisthesetpixelunit
Graphicsimulationinterfaceisshownbelow:
[MONITOR]
[Track]