Adtech ADTECH4 CNC Series - Page 108

ADTECH4 SeriesCNC Maintenance Manual
Default
:
Speed2
Effective time
:
Instant
Note
:
In pretreatment mode, set to Angle to use corner speed balancing
algorithm, or set to Speed to use axis acceleration constraints balancing
algorithm, or set to Speed1 to use efficient and quick acceleration
constraints balancing algorithm.
019
Code pretreatment processing mode
Range
:
0~1
Unit
:
None
Authority
:
Operation admin
Default
:
0 (rear-time processing)
Effective time
:
Instant
Note
:
Real-time processing is suitable for machine test.
In pretreatment mode, the system enters processing state buffs for two
seconds and pre-reads. The pretreatment mode only can check the
direction and size of feeding segment to adjust the speed automatically
and process at optimized speed.
020
CNC file scan flag
Range
:
0~1
Unit
:
None
Authority
:
Operation admin
Default
:
1
Effective time
:
Instant
Note
:
File scanning symbol will quicken the file transfer speed when
processing large files.
When transferring NC files, the system needs to scan over to position
every program block. In this way, if the file only has one block and the
file size is very big, it will cause unnecessary waiting time. If this option
is closed, the system will exit after scanning the address of first block.
021
Variable frequency analog control mode
Range
:
0~1
Unit
:
None