Adtech ADTECH4 CNC Series - Page 137

ADTECH4 SeriesCNC Maintenance Manual
C axis home deceleration speed
034
X axis home scanning speed
Y axis home scanning speed
Z axis home scanning speed
4 axes home scanning speed
B axis home scanning speed
C axis home scanning speed
Range
:
1~20000
Unit
:
mm/min
Authority
:
Super admin
Default
:
100, 60
Effective time
:
Instant
Note
:
Used to set different speed parameters for mechanical home; the specific
effect is as follows:
Home speed - (when external switch home is detected) Deceleration
speed - Scanning speed.
035
X axis pitch compensation function enable
Y axis pitch compensation function enable
Z axis pitch compensation function enable
4 axes pitch compensation function enable
B axis pitch compensation function enable
C axis pitch compensation function enable
Range
:
OFF ON
Unit
:
None
Authority
:
Super admin
Default
:
OFF
Effective time
:
Instant
Note
:
Set to ON and the pitch compensation of axis X, Y, Z, 4, B, C is valid.
036
X axis pitch compensation spacing
Y axis pitch compensation spacing