ADTRAN Total Access 600R System Manual

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 115
SECURITY > RADIUS SERVER > SERVER 3
This is the IP address of the third RADIUS SERVER the unit should attempt to communicate with when
authenticating a Telnet session. Default is
0.0.0.0.
SECURITY > RADIUS SERVER > UDP PORT
This is the UDP port the unit should use when communicating with the RADIUS SERVER. The default is
1812, which is the commonly used port.
SECURITY > RADIUS SERVER > SECRET
The RADIUS SERVER and unit share this text string. It is used by the RADIUS SERVER to authenticate the unit,
the RADIUS client. The factory default is not to use a secret.
SECURITY > RADIUS SERVER > RETRY COUNT (1-10)
This is the number of times the unit should send a request packet to the RADIUS SERVER without a response
before giving up. If the number of attempts to communicate with the primary server is equal to the retry
count, the second server (if defined) is tried. If the second server does not respond within the retry count,
the third server (if defined) is tried. If the third server does not respond within the retry count, the Telnet
session is not authenticated and is dropped. The default is
5.

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English