61200600L1-1A © 2002 ADTRAN, Inc. 167
LOADING THE CURRENT CONFIGURATION USING XMODEM
Introduction
The unit supports configuration uploads from a unit using a VT100 terminal or terminal emulator (with
XMODEM) and the
CRAFT interface. This DLP provides the steps for a successful configuration upload
using the
CRAFT port and XMODEM.
Prerequisite Procedures
Obtain the configuration file (see for DLP-011, Loading the Current Configuration Using XMODEM, for
details).
Tools and Materials Required
• VT100 terminal or PC with VT100 terminal emulation software
• XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
To Next Page
Loading...
