Total Access 600R System Manual Section 6 ADTRAN Utilities
61200600L1-1A © 2002 ADTRAN, Inc. 187
About
Displays version and owner information.
3. TFTP SERVER
The TFTP Server utility transfers configuration files to and from a TFTP server. You can install this
program on a PC running any version of Microsoft Windows. The configuration of the unit can be saved
offline as a backup file. The saved file may also be used to send the same configuration to multiple units.
Transfer configuration files using the TFTP protocol (a TCP/IP user protocol) via the
10/100BASET
Ethernet port. The unit must have a valid IP address, subnet mask, and default gateway (if required), and be
connected to an Ethernet network before proceeding. Figure 3 shows the TFTP Sever Interface Menu Tree.
Figure 4 shows the TFTP server interface. For information on transferring and saving configurations using
TFTP, refer to the Detailed Level Procedures section of this manual.
Figure 3. TFTP Server Interface Menu Tree
Files must be placed in the Application directory where you installed the product.
Received files are also placed here.
Enable
Server Disable
Abort
Exit
TFTP Server ...to Clipboard
Print Log ...to Printer
Clear Log
Help Contents
About
To Next Page
Loading...
Need help?
General
