ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide Total Access 600R System Manual
46 © 2002 ADTRAN, Inc. 61200600L1-1A
SYSTEM CONFIG
Set up the unit’s operational configuration from the SYSTEM CONFIG menu. Figure 4 shows the items
included in this menu.
Figure 4. System Config Menu
SYSTEM CONFIG > MANAGEMENT
Set up the CRAFT PORT, TELNET ACCESS, SNMP MANAGEMENT, and FDL MANAGEMENT from this menu.
SYSTEM CONFIG > MANAGEMENT > CRAFT PORT
Set up the CRAFT PORT parameters from this menu.
SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > PASSWORD PROTECT
The unit’s VT100 CRAFT port can be accessed via an RJ-48 connector located on the rear of the unit.
When
PASSWORD PROTECT is set to NO, the CRAFT port is not password protected. When YES (def), the
unit will prompt for a password upon startup.
SYSTEM CONFIG > MANAGEMENT > CRAFT PORT > PASSWORD
This is the text string that is used for comparison when password protecting the CRAFT port. By default,
no password is entered. You can enter up to 30 characters in this field. Table 2 provides instructions for
changing the password.

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English