ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide Total Access 600R System Manual
64 © 2002 ADTRAN, Inc. 61200600L1-1A
INTERFACES
Use the INTERFACES menu to view and configure parameters for the T1 and Ethernet interfaces as shown in
Figure 6.
Figure 6. Interfaces Menus
INTERFACES (T1[0])
View the T1 interface status and configure T1 parameters from this menu.
INTERFACES (T1[0]) > CONFIG
Configure the various T1 parameters and enable/disable loopbacks from this menu.
INTERFACES (T1[0]) > CONFIG > TIMING MODE
Choices are NETWORK and INTERNAL. Select NETWORK when the unit will receive timing from the network.
Select
INTERNAL when the unit will generate the timing. Default is NETWORK.
The 0 in T1[0] represents a physical port. The T1 physical port is always 0.

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English