ADTRAN Total Access 600R - Saving the Current Configuration Using XMODEM

61200600L1-1A © 2002 ADTRAN, Inc. 165
SAVING THE CURRENT CONFIGURATION USING XMODEM
Introduction
The unit supports configuration transfers from the unit using a VT100 terminal or terminal emulator (with
XMODEM) and the
CRAFT interface. This DLP provides the steps to follow for a successful configuration
transfer using the
CRAFT port and XMODEM.
Tools and Materials Required
• VT100 terminal or PC with VT100 terminal emulation software
• XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.