ADTRAN Total Access 600R System Manual

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 57
SYSTEM CONFIG > SYSLOG > HDLC LEVEL
Minimum required level for sending low level HDLC log messages.
SYSTEM CONFIG > SYSLOG > VOATM LEVEL
(This parameter is not applicable for the Total Access 600R.)
SYSTEM CONFIG > SYSLOG > PPPOA LEVEL
(This parameter is not applicable for the Total Access 600R.)
SYSTEM CONFIG > SYSLOG > FDL LEVEL
Minimum required level for sending FDL log messages.
SYSTEM CONFIG > NETWORK TIME
Activate the network time and configure the server type, time zone, and various other network time
parameters from this menu.
SYSTEM CONFIG > NETWORK TIME > SERVER TYPE
The unit time can be entered manually from the SYSTEM INFO menu, or the unit can receive time from an
NTP/SNTP server. The
NETWORK TIME menu includes all parameters relating to how the unit
communicates with the time server.
The server type defines the port on which the unit will listen to receive timing information from the time server.
The choices are
NT TIME and SNTP. When set to NT TIME, the unit will receive time from an NT server running
SNTP software on its TIME port. When set to
SNTP, the unit will receive time directly from an SNTP server.
The factory default is
SNTP.
SYSTEM CONFIG > NETWORK TIME > ACTIVE
This network timing feature can be turned on and off. It determines whether the unit will request and
receive time from a time server. The factory default is
NO.

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English