ADTRAN Total Access 600R System Manual

Total Access 600R System Manual Section 6 ADTRAN Utilities
61200600L1-1A © 2002 ADTRAN, Inc. 183
Host Name
Accepts and stores host names. You may enter a name, an IP address, or a domain name directly from
this field. Click on the drop-down arrow to display a complete list of previously stored host names.
PORT
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
Edit Entry
Changes either the unit name or the IP address of each
host. Press either
Tab, Return, or a period (.) after each
number in the IP address to move to the next field. If you
press
Return or (.) while the cursor is located in each IP
field, that field entry is deleted.
Add New
Prompts you for the same information as the EDIT ENTRY
dialog box for new host. When enabled, the
USE DNS (Domain Name Server) feature allows users to
request
DOMAIN LOOK UP via a DNS server on the network rather than specifying an IP address. The
name then appears in the
HOST NAME field.
Delete
Removes a host name from the list; simply select the host name you want to remove, and, at the
prompt, click
DELETE.
Connect
Establishes the Telnet session.
Disconnect
Terminates the Telnet session.
To re-establish the session, select
CONNECT from SESSION MENU or press <ENTER> three times. This
action restores the previous connection.
Transfer Cfg
This feature is used with ADTRAN products primarily for sending configuration files to the unit.
Exit
Ends the Telnet session and closes the Telnet screen.
Edit Menu
Provides COPY and PASTE commands.
TELNET establishes a Telnet session
E
CHO provides a loopback for troubleshooting
D
ISCARD bit bucket; discards data
D
AYTIME returns the time
C
HARGEN displays as a unique character stream; used for self-tests

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English