Name: ADTRAN Total Access 600R
Brand: ADTRAN
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Total Access 600R System Manual Section 4 User Interface Guide

SYSTEM UTILITY > PING > % LOSS

Percentage loss based on ping returned from host (read-only).

SYSTEM UTILITY > TRACEROUTE

Utility program used to trace a data path to a final destination.

SYSTEM UTILITY > TRACEROUTE > TRACE TARGET

Specifies the IP address of the remote system to trace the routes to.

SYSTEM UTILITY > TRACEROUTE > MAXIMUM HOPS

Specifies the maximum number of router exchanges allowed when traveling to the final destination

(specified using the

TRACE TARGET field). Range is 1 to 30. Default is 30.

SYSTEM UTILITY > TRACEROUTE > TIMEOUT (IN SECS)

Specifies the maximum delay (in seconds) given to a host (along a path to the final destination) to respond

to the probe datagram sent before considering the packet a failure.

SYSTEM UTILITY > TRACEROUTE > RETRIES

Specifies the number of times the probe datagram is sent to each host (along the path to the final

destination).

SYSTEM UTILITY > TRACEROUTE > BEGIN TRACEROUTE

Activator to begin the traceroute process by sending a probe datagram with a Time To Live (TTL) value of

SYSTEM UTILITY > RESET UNIT

Selecting this activator will power reset the unit.

SYSTEM UTILITY > TERMINAL MODE

The terminal mode gives the user a command-line prompt. From this prompt, you can:

• Perform a reset with the command "reset"

• Perform a factory restore with the command "factory_reset"

• Configure the unit. The unit has the ability to download a text file which contains the configuration of

the entire unit. This configuration may then be altered in a text editor, and then uploaded to a unit. (See

DLP-013, Saving and Loading Text Configuration Using the Terminal Command Line, for further

assistance.)

• Debug and troubleshoot. This function would be carried out with the assistance of ADTRAN Technical

Support.

• Start and stop the fail-safe timer for the auto-config feature, (See DLP-014, Unit Installation Using The

Auto-Config Feature for details.)

ADTRAN Total Access 600R System Manual

Other manuals for ADTRAN Total Access 600R