ADTRAN Total Access 600R System Manual

Total Access 600R System Manual Section 1 System Description
61200600L1-1A © 2002 ADTRAN, Inc. 19
Protocol Support
•IP
• DNS
•TCP
• RIP V1, V2 and static routes
• UDP, UDP Relay
•ICMP
•ARP
•PPP
•Frame Relay
Frame Relay
• Support for both point-to-point and point-to-multipoint networks using up to 10 PVCs
• RFC 1490 Encapsulation (Multiprotocol over Frame Relay)
• Signaling Types: LMI, Annex D (ANSI), Annex A (Q933A), and Static (No Signal)
PPP
• LCP, IPCP, BCP, CCP
• Van Jacobson (VJ) header compression
Routing Capability
• Ethernet: 10/100BaseT (RJ-45)
• IEEE 802.3 and 802.1D (MAC Bridging)
• IP Support: TCP, RIP V1, RIP V2, UDP, ICMP, ARP, UDP Relay, SYSLOG
• PPP Support: LCP, IPCP, BCP
• DHCP Server to LAN, DHCP from network (NAT)
Security
• PAP, CHAP, EAP, and Radius
• NAT/NAPT
• Packet filtering by source and destination IP address, source and destination port number, MAC
address, protocol or pattern
• Multi-layer password protection
• Telnet security: Access list and password protection
Integrated Components
•IP router
• Network connection
• 10/100BaseT connection
•
CRAFT port

ADTRAN Total Access 600R Specifications

General

Brand	ADTRAN
Model	Total Access 600R
Category	Network Router
Language	English