174 © 2002 ADTRAN, Inc. 61200600L1-1A
Section 5 DLP-014 Total Access 600R System Manual
Tools and Materials Required
• VT100 compatible terminal or computer with terminal emulation software (only required if unit has to
be factory defaulted)
• Appropriate cable to connect terminal to the unit (customer provided, only required if unit has to be
factory defaulted)
• DB-9 female to RJ-45 female adapter for connecting to the
CRAFT port on the rear of the unit (only
required if unit has to be factory defaulted)
• Silver Satin Cable for
CRAFT access (P/N 3127004 provided with unit, only required if unit has to be
factory defaulted)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
To Next Page
Loading...
