EasyManua.ls Logo

ADTRAN Total Access 600R - Page 94

ADTRAN Total Access 600R
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 4 User Interface Guide Total Access 600R System Manual
94 © 2002 ADTRAN, Inc. 61200600L1-1A
ROUTER > CONFIG > DHCP SERVER > DHCP RENEWAL TIME (HOURS)
The number of hours that the DHCP server should allow the device to keep its previous IP assignment,
before it is required to send a new DHCP request. The default is
15 HOURS.
ROUTER > CONFIG > DHCP SERVER > DOMAIN NAME
Text string used to represent the domain name used by the unit.
ROUTER > CONFIG > DHCP SERVER > PRIMARY DNS
IP address of first server to which domain name requests are sent. Default is 0.0.0.0.
ROUTER > CONFIG > DHCP SERVER > SECONDARY DNS
IP address of server used as a backup, in case the primary address does not respond to the request. Default
is
0.0.0.0.
ROUTER > CONFIG > DHCP SERVER > PRIMARY NBNS/WINS
Primary address of the NBNS/WINS server. Default is 0.0.0.0.
ROUTER > CONFIG > DHCP SERVER > SECONDARY NBNS/WINS
Secondary address of the NBNS/WINS server. Default is 0.0.0.0.
ROUTER > CONFIG > UDP RELAY
This menu configures the unit to act as a UDP relay agent for applications requiring a response from UDP
hosts that are not on the same network segment as their clients.
ROUTER > CONFIG > UDP RELAY > MODE
When this option is set to ON, the unit will act as a relay agent. Default is OFF.
ROUTER > CONFIG > UDP RELAY > UDP RELAY LIST
Up to four relay destination servers can be specified in this list.
#
Indicates the entry number in the UDP Relay List table.
RELAY ADDRESS
This is the IP address of the server that will receive the relay packet. Default is 0.0.0.0.

Table of Contents

Other manuals for ADTRAN Total Access 600R

Related product manuals